2 Rolls Highly Automatic Steel Wire/Bar and Copper Alloy Rod Metal Straightening and Cutting Machine

• After-sales Service: Online Support
• Type: Balance Roller Straightening Machine
• Usage: Pipe, Bar
• Model NO.: JY40Z
• Voltage: 380V
• Automatic Grade: Automatic
• Principle: Small Deformation
• Certification: ISO9001, CE
• Warranty: 12 Months
• Customized: Customized
• Condition: New
• Color: Customized
• Loader: Automatic
• Unloader: Automatic
• Commissioning: Paid
• Transport Package: Seaworthy Package
• Specification: dimension: 5.5mX2.0mX1.35m
• Trademark: RW
• Origin: Shandong, China
• HS Code: 84581900
• Production Capacity: 1000PCS/Year

Product Description

General Introduction
2-roll straightening machine is mainly used to straighten bended and distorted metal rods or pipes with guaranteed wall thickness with high efficiency. It can process both nonferrous metal or non-metal rod materials. 2-roll straightening machine and peeling machine can be combined to be a connected unit. If straightness of raw materials is above 1.5mm/m, pre-straightening shall be used before peeling.
There are 3 structures of 2-roll straightening machine : two-beam and four-column, pre-stressed type and frame type. After straightening, straightness of finished products can achieve 0.25~0.4mm/m. Surface roughness is less than 1 μm. The transportation devices have both manual and automatic types.

Strengths & Metrics
Optimized straightening effect, applicable to high strength materials
Pre-set angle of straightening rolls; Hyperbola of top and bottom uneven rolls guarantees linear friction between straightening rolls and rods
Infinite variable speed is adopted to adjust speed steadily.
Cooling lubricating extends working life of straightening rolls
Straightening rolls are installed vertically with greater straightening force and is in favour of maintenance
Parameter table

Model		JY40Z
Workpiece required	Diameter range (mm) (non-)	Tensile strength σb≤450(Mpa)	Φ8~Φ40(L≥2000)
		Tensile strength σb≤1000	Φ5~Φ18(L ≥2000)
	Surface hardness	≤HB380(≤HRC42)
	Straightness	≤3
	Diameter tolerance	Bright steel≤IT10
	Roundness	≤ 50% of diameter tolerance
	Surface roughness	≤3.2~6.3mm
Finished product	Straightness	≤0.3
	Diameter tolerance	≤IT8
	Surface roughness (Ra)	≤0.8μm
Quantity of roll		2
Roll diameter (mm)		Φ200
Straightening speed (infinite variable speed)		2~14(m/min)
Main motor power (kW)		30X2
Lift motor power (kW)		1.1
Dimensions (m)		Host machine 5.5X2.0X1.35
Total capacity (kW)		70
Source of compressed air (Prepared by the user)		0.5~0.8MPa,3m3/min,with  second grade oil-water separator

Compositions


Optional Models

Model	Input Dia	Length	Feeding Speed	Surface Roughness	Straightness	Spindle Motor	Total Capacity
JY20Z	ф5-ф20mm	≥2000mm	2-30m/min	Ra≤0.8	≤0.25mm/m	2×7.5KW	18KW
JY40Z	ф8-ф40mm	≥2000mm	2-30m/min	Ra≤0.8	≤0.25mm/m	2×22KW	47KW
JY60Z	ф10-ф60mm	≥2000mm	2-30m/min	Ra≤0.8	≤0.25mm/m	2×37KW/55KW	90/100KW
JY80Z	ф20-ф80mm	≥2000mm	2-20m/min	Ra≤0.8	≤0.25mm/m	2×55KW/75KW	125/170KW
JY100Z	ф25-ф100mm	≥3000mm	2-15m/min	Ra≤0.8	≤0.25mm/m	2×75KW	170KW
JY130Z	ф35-ф130mm	≥3000mm	2-15m/min	Ra≤0.8	≤0.25mm/m	2×90KW	200KW
JY160Z	ф40-ф160mm	≥3000mm	1-10m/min	Ra≤0.8	≤0.25mm/m	2×132KW	280KW
JY200Z	ф60-ф200mm	≥3000mm	1-10m/min	Ra≤0.8	≤0.25mm/m	2×185KW	410KW